G3 Two-Step Concentrate - 8oz / 128oz

Make up an easy gallon of G3!

Mix this 8oz bottle into a gallon bottle of distilled water to make 1 gallon of G3 Fluid. 

  1. Buy a gallon jug of distilled water.
  2. Pour out 8oz of the distilled water.
  3. Pour in the 8oz bottle of G3 Concentrate. Remove the plastic label.
  4. Shake the gallon jug well and fill the 8oz G3 Bottle.
  5. Attach the mist sprayer and clean records as directed.

    Our *Two-Step G3 Record Cleaning Fluid is for heavier cleaning needs. It's the same formulation as our One-Step G2 Fluid with one important difference: An increased surfactant concentration for greater power to get down and do the dirty work!

    G3 can be used with both record vacuum cleaning machines and manual methods.

    *G3 Fluid requires a rinsing step. Either use our GSR Super Rinse Fluid (see separate listing) or distilled water.

    G3 Fluid Contains:

    Surfactants:
    State of the art detergents dissolve and suspend fingerprints and other oily grime.

    Super wetting agent: A specialty chemical that reduces the G2 Fluid's surface tension to reach the bottom of the groove. When you spray G2 Fluid on a record you can see it spread down the grooves.

    Emulsifiers: Holds the oils, dirt, mildew and microdust particles in suspension. Then the microfiber fabric cleaning pad wipes and pulls the dirt-filled solution from the record surface. 

    Laboratory grade, double deionized, carbon filtered & UV treated water: Carrier for the active cleaning ingredients. Eliminates static electric charges on the record's surface on contact.

    G3 Two-Step Record Cleaning Fluid is formulated and made by GrooveWasher in Kansas City, MO, USA. 


    G GROOVE WASHER THE ULTIMATE CLEAN SOUNDS SOLUTION



    Next Previous

    Related Items